Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exterior Wing Mirror on a Renault Mégane 3

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Side mirror

In this guide, you will see step-by-step instructions for removing and replacing the exterior wing mirror on the third series Renault Mégane, in simple steps. First, open the front door and start by removing the triangular plastic cover behind the mirror, prying it off from the sides; then disconnect the electrical connector of the mirror, as shown in the video. At this point, use a Torx screwdriver to unscrew the screws; all that’s left is to pull the mirror out from the outside and replace it with the new one!

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the External Rear-View Mirror of the Renault Megane
How to Remove the External Rear-View Mirror of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today, follow these step-by-step instructions to remove and replace the external rear-view mirror of the Renault Megane. First, open the front door o…
How to disassemble and install the external rearview mirror of the Renault Megane
How to disassemble and install the external rearview mirror of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today's steps will show us how to disassemble and replace the external rearview mirror of the Renault Megane. First, we open the front door and start…
How to Replace the External Wing Mirror on the Renault Megane?
How to Replace the External Wing Mirror on the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the external wing mirror on the Renault Megane, you need to detach the triangular plastic cover located inside the door, corresponding to …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos