Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Wing Mirror on the Renault Megane?

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Side mirror

See other generations:
Video tutorial

To replace the external wing mirror on the Renault Megane, you need to detach the triangular plastic cover located inside the door, corresponding to the mirror. Once this cover is removed, you can disconnect the underlying connector and unscrew the 15mm Torx screws found in this position.

When these screws are loosened, you can detach the mirror from the exterior of the door to insert a new one. This should be secured with the screws, reconnecting the connector and covering everything with the triangular panel.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to Replace the External Wing Mirror on the Renault Megane
How to Replace the External Wing Mirror on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow the necessary steps to remove and replace the external wing mirror on the Renault Megane. First, open the front door and start by removing the…
Replacing the External Rear-View Mirror of a Renault Megane
Replacing the External Rear-View Mirror of a Renault Megane
Renault Megane (2002-2010 / Megane 2) The steps in this guide will allow you to remove and replace the external rear-view mirror of a Renault Megane. First, get inside the vehicle and sta…
How to Remove the External Rear-View Mirror of the Renault Megane
How to Remove the External Rear-View Mirror of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Today, follow these step-by-step instructions to remove and replace the external rear-view mirror of the Renault Megane. First, open the front door o…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos