Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the service warning light on Renault Clio 2006

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Service warning light

To reset the service warning light on the 2006 Renault Clio it is necessary to use the two side buttons up and down on the right steering lever, the lever behind the steering wheel to operate the windshield wipers. Click on the button to scroll through the on-board computer menu, until you reach the service setting. To reset the warning light, the next move is to hold the up button down for a few seconds, as soon as you see the Service item on the instrument panel flash. As soon as you see this item flashing, you can release your finger from the side key. To complete the operation it will now be sufficient to turn off the ignition.

Posted on 16 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Clio 5
How to reset the service light on the Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) The procedure for resetting the service light, related to the car service, on a Renault Clio model 5, follows very simple and quick steps. First, we …
How to reset the "Service" light on a Renault Clio?
How to reset the "Service" light on a Renault Clio?
Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today's goal is to reset the "Service" light of our Renault Clio. Let's turn on the car's instrument panel by pressing the ignition but…
How to reset the "Service" light on a Renault Clio
How to reset the "Service" light on a Renault Clio
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) Before we can begin, we will have to sit in the driver's seat of our Renault Clio. Let's start by activating the instrumentation of our Renault Clio.…

Other guides you may be interested in

How to Replace the Oil Sump on a Ford Focus

Follow these steps to remove and replace the oil sump on a Ford Focus engine. Lift the car on a column lift and (at your preferred height) use a socket wrench to unscrew the sump plug, allowing the oil to drain into a container (for disposal) and then re-screw the plug. Remove all the side plastics protecting the undercarriage using a battery or manual drill, then unscrew the fastening bolts around the perimeter of the oil sump. After removing the bolts from the sump, detach it from the engine block along with the gasket using a screwdriver as leverage. Clean everything and refit the new part.

Watch the video!


by ScegliAuto

More videos