Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the steering wheel and airbag of the Renault Clio.

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Steering wheel

Today's instructions will show us how to disassemble the steering wheel and its airbag of the Renault Clio. First, we get into the car and start by releasing and removing the steering wheel airbag, using something thin like a flathead screwdriver to release the two levers located on the back; then we disconnect the electrical connector, as shown in the video. At this point, we unscrew the central nut of the steering wheel to remove it from the steering column; replace it if necessary with a new one and reassemble it in a straight position, applying the reverse procedure!

Posted on 2 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel Airbag on a Renault Clio
How to Remove the Steering Wheel Airbag on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This guide shows how to remove the steering wheel airbag on a Renault Clio. Before removing the steering wheel, disconnect the car's power terminals.…
Removing Steering Wheel on Renault Clio
Removing Steering Wheel on Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Let's look at removing the steering wheel of a Renault Clio. Before disassembling the steering wheel and airbag, disconnect the battery power cables.…
How do you remove the steering wheel and airbag of the Renault Clio IV?
How do you remove the steering wheel and airbag of the Renault Clio IV?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video, we can see how to disassemble the steering wheel and airbag of the Renault Clio IV: first, we will need to remove the airbag. To do th…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos