Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Interior Bulbs on the Renault Clio 2

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Interior dome light bulb

In today's tutorial video, you will learn how to dismantle and replace the interior bulbs, including the cabin light, on the second series Renault Clio. First, get inside the vehicle and start by unfastening and removing the cabin light located on the roof; to do this, pry it from the sides and then disconnect the electrical connector of the bulb, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type; insert it properly and reassemble everything, following the reverse procedure of dismantling!

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Interior Light Bulb on a Renault Clio
How to Replace the Interior Light Bulb on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Learn how to replace the bulbs in the interior light of a Renault Clio. Use a screwdriver to pry between the cover of the interior light and the ligh…
Removing the Interior Light of a Renault Clio
Removing the Interior Light of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) How to remove the interior light of a Renault Clio? Let's see how to take down the interior light and replace the damaged bulbs. Pry between the inte…
How to Change the Interior Light Bulbs on the Renault Clio 4
How to Change the Interior Light Bulbs on the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In today's video tutorial, you will see how to remove the interior light unit and replace the bulbs on the fourth generation Renault Clio. First, get…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos