Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Interior Light Bulbs on the Renault Clio 4

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Interior dome light bulb

In today's video tutorial, you will see how to remove the interior light unit and replace the bulbs on the fourth generation Renault Clio. First, get inside the vehicle and start by removing the light unit by prying at the sides; then remove the two bulbs from the light unit as shown in the video. At this point, pry off the rear cover to replace the bulbs located inside; simply reconnect the light unit and the bulb to the electrical connector and reassemble everything by following the reverse procedure!

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Centre Light of the Interior Dome on the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today, we will see the procedure necessary to disassemble and replace the interior light of the dome on the Renault Clio fourth series, in simple and…
Removing the Interior Light of a Renault Clio
Removing the Interior Light of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) How to remove the interior light of a Renault Clio? Let's see how to take down the interior light and replace the damaged bulbs. Pry between the inte…
Replacing Interior Light Bulb on Renault Clio
Replacing Interior Light Bulb on Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Below, we will discover how to remove and replace the interior light bulb of a Renault Clio. First, get inside the vehicle and start prying on the si…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos