Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Clio
  6. : How to replace the bulbs in the center console in the Renault Clio?

Renault Clio - Video tutorial

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Light bulb
Operation: How to replace the bulbs in the center console in the Renault Clio?

As we can see in this tutorial, replacing the bulbs in the center console of the Renault Clio is a very simple operation. First of all, make sure the vehicle is off, then remove the car radio using the appropriate keys indicated and easily available online. Then disconnect all the internal connectors and disengage the console frame with a possibly plastic spatula, so as not to leave any marks. At this point we can unscrew the two screws indicated, remove the console and proceed with the replacement of the faulty bulb.


Posted on 13 October 2022 by ScegliAuto



How to remove the center console of the Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In order to remove the center console of the Renault Clio you need to insert the special U-shaped wrenches inside the holes on the car radio. In this
How to install the Eco mode switch on the Renault Clio IV.
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The Renault Clio IV models are all equipped with Eco Mode, but it can happen that some cars leave the factory without the Eco button installed. Like
Renault Clio front lights replacement
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video we will see how to replace the H7 low beam bulbs of the Renault Clio. In the case in question we are going to mount bulbs different fro

    Frequently Asked Questions

    • Clio 2012-2019 - Why don't the position lights on my Renault Clio work? Read Answer
    • Clio 2012-2019 - How do you replace the position lights on the Renault Clio? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos