Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to replace the rear light bulbs of a Renault Clio

Renault Clio - Video tutorial

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years 2012-2019
Part: Rear light bulb
Operation: How to replace the rear light bulbs of a Renault Clio

Let's see in this video how to replace the damaged bulbs in the rear light of a Renault Clio. We open the bonnet of the luggage compartment, with a screwdriver we unscrew (with a socket wrench or screwdriver with insert) the tightening nuts placed on the side of the rear light; as soon as the headlight is free from any constraints, we can detach it from the bodywork (disconnect the relative power supply terminals). We replace damaged bulbs with identical pieces (size and voltage). Finally we go to reassemble the lighthouse and proceed backwards in the assembly of the other pieces. We test the bulbs.


Posted on 23 November 2023 by ScegliAuto



Removing the rear light and replacing the bulbs on the Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Let's see in this guide how to remove the rear light and replace the bulbs on the Renault Clio third series, following these simple steps. First we o
How to replace the rear light bulb on Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In today's video tutorial we will see how to remove and replace the rear light bulbs of the Renault Clio, following the instructions below. First of
How to replace the rear light bulbs on Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Let's see in this video how to remove and replace the rear light bulbs on the Renault Clio fourth series, following these simple steps. First of all,

Other guides that may interest you

    Frequently Asked Questions

    • Clio 2005-2013 - What is the fuse for the reverse lights on the Renault Clio 3? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos