Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Modus
    4. : Brake pads replacement on Modus

Renault Modus - Video tutorial

Model: Renault Modus MK 1 - Years 2004-2013
Part: Brake discs
Operation: Brake pads replacement on Modus

Are the brake pads worn out? Do we want to replace them from inside the brake pads? We disassemble the wheel and see the disassembly. We raise the car on a column point (jack) to the desired height, immediately after we go to remove the rim (with a telescopic wrench or compressed air drill) with the respective pins. We unscrew the locking pin of the brake caliper, remove the same from the wheel support. Using a screwdriver, we disassemble the pads to be replaced from the wheel hub caliper, remove the brake caliper. We assemble the new tablets inside the caliper, then we assemble all the pieces.


Posted on 20 March 2024 by ScegliAuto



Replacing the disc brake pads
Renault Modus (2004-2013 / MK 1) Loosen the wheel nuts and lift the car to secure it. Unscrew the bolts and remove the wheel. Unscrew the two screws holding the caliper with a wrench
How to enter the unlock code of the car radio of a Renault Modus
Renault Modus (2004-2013 / MK 1) Before starting, we will have to go and sit in the driver's seat of our Renault Modus. So let's start by activating the instrument panel and the on-b
How to remove rear seats in Renault Modus
Renault Modus (2004-2013 / MK 1) In today's video we see how the rear seats of the Renault Modus work; this tutorial also applies to the longer Grand Modus version. First we open the

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos