Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb on the Renault Scenic?

Model: Renault Scenic MK III, MK 3, Scenic III, Scenic 3 - Years 2009-2015
Part: Light bulb

To be able to replace the headlight bulb on the Renault Scenic, you need to open the hood to access the rear part of the headlight which requires the bulb to be replaced. Here, you will find a circular cover, which will need to be removed to access the internal components of the headlight. By doing so, the bulb can be extracted from its housing and disconnected from its connector, so that a new spare part can be installed. The new bulb will then have to be connected to the connector, inserted into its housing and sealed with the circular headlight cover.

Posted on 15 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb on a Renault Scenic
How to replace the headlight bulb on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Before we can start, we will have to go and open the front hood of our Renault Scenic. So let's start by extracting the burnt out bulb from its housi…
How to replace the headlight bulb of the Renault Scenic
How to replace the headlight bulb of the Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Let's see in this guide the steps on how to remove and replace the headlight bulb of the Renault Scenic, following the instructions below. First of a…
How to replace the headlight bulb on a Renault Scenic
How to replace the headlight bulb on a Renault Scenic
Renault Scenic (1996-2003 / ) Before starting, we will have to open the front hood of our Renault Scenic. So let's start by disengaging and removing the back cover of the burned o…

Other guides you may be interested in

How to Remove the Front Headlamp of a Renault Clio

Remove the front headlamp of a Renault Clio. Open the bonnet by pulling the release lever and secure it; using a battery-powered screwdriver or a screwdriver, undo the securing bolts located at the top of the bumper. Once the screws at the top are undone, remove the splash guard bolts and finally remove the bolts at the bottom of the bumper. Carefully detach the bumper from the body of the vehicle. At this point, disconnect the headlamps from the body (undo the securing bolts) and the bulb holder from the headlamp. Fit the new headlamp with new bulbs if damaged (always ensure the correct type and size) and insert the headlamp into its housing. Finally, refit the front bumper and tighten the bolts.

Watch the video!


by ScegliAuto

More videos