Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Plastic Undertray of the Renault Clio 3

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

In this short video, see how to remove the plastic protection found under the engine of the Renault Clio third series, in simple and quick steps. First, lift the vehicle and start unscrewing all the fixing screws around the undertray; use a socket spanner and a Torx key, as shown in the video.

After unscrewing all the screws, you can remove the undertray, gaining access to the underside of the engine and the sump (you can now perform the engine oil drain); finally, reassemble everything!


Updated on 2 May 2026 by ScegliAuto


Related tutorials

Renault Clio Diesel Filter Removal
Renault Clio Diesel Filter Removal
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To remove the diesel filter on a Renault Clio, take out the diesel filter located in the front bumper. Remove the right wheel, then take off the plas…
How to Remove the Front Bumper on a Renault Clio
How to Remove the Front Bumper on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Want to remove the front bumper on a Renault Clio? Let's see how to proceed with the disassembly in the video: open the bonnet by pulling the bonnet …
Removing Front Bumper on a Clio
Removing Front Bumper on a Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Remove the front bumper on a Clio. Lift the bonnet and secure it. Unscrew the fastening screws located at the top of the bumper. Once the screws at t…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos