Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Bumper on a Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Front bumper

Remove the front bumper on a Clio. Lift the bonnet and secure it. Unscrew the fastening screws located at the top of the bumper. Once the screws at the top are removed, unscrew the screws under the wheel arch liners and the screws located at the bottom of the bumper. Pull the bumper away from the body of the vehicle by hand. Connect the electrical connectors, secure the bumper to the body of the vehicle, and proceed to tighten all screws around both the wheel arch liners and the perimeter. Join the bumper plastics with the wing panel.

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper on a Renault Clio
How to Remove the Front Bumper on a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Want to remove the front bumper on a Renault Clio? Let's see how to proceed with the disassembly in the video: open the bonnet by pulling the bonnet …
Renault Clio Diesel Filter Removal
Renault Clio Diesel Filter Removal
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To remove the diesel filter on a Renault Clio, take out the diesel filter located in the front bumper. Remove the right wheel, then take off the plas…
Removing the Front Headlight of the Clio
Removing the Front Headlight of the Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Do you want to remove the front headlight of a Renault Clio? Let's see how to disassemble the front headlight. Before removing the front headlight, y…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos