Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Wiper Motor on the Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013

In this video tutorial, see how to remove and replace the wiper motor on the Renault Clio, following these simple steps. First, open the bonnet and start by unscrewing the screws of the wiper arms to remove them; then remove the plastic cover to access the mechanism and the wiper motor, as shown in the video. At this point, unscrew the screws of the wiper motor, disconnecting the electrical connector to remove it; now replace it with the new one, using the original spare part, and reassemble everything!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Windscreen Wiper Motor on a Renault Clio
How to Replace the Windscreen Wiper Motor on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This guide shows you how to remove and replace the windscreen wiper motor on a Renault Clio, following the instructions below. First, open the bonnet…
Replacing the Windscreen Wiper Motor on Renault Clio 3
Replacing the Windscreen Wiper Motor on Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video, you will learn how to change the wiper motor on the third series Renault Clio. Open the bonnet and remove the wiper caps: unscrew the …
Removing Wiper Motor from Renault Clio
Removing Wiper Motor from Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Need to remove the wiper motor from a Clio? The motor is mounted under the plastics near the windscreen, let's see how to take it off. Unscrew the sc…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos