Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Renault Megane?

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part:

In this tutorial, you will learn how to reset the tyre pressure light on a Renault Megane MK4, a very simple operation to be performed only after restoring the correct pressure in each tyre, which can be checked on the label located inside the driver's door. To proceed with the reset, switch on the instrument cluster, enter the general menu via the touchscreen, and select the "Vehicle" option. Next, scroll the screen to the right and enter the "Tyre pressure" section, where you will perform the reset by selecting the "Reset" option at the bottom.

Updated on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on the Renault Megane
Resetting the Tyre Pressure Warning Light on the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) Today, you will see the instructions that will allow you to reset the tyre pressure warning light (TPMS) on the Renault Megane; before performing the…
How to Reset the Tyre Pressure Light on a Renault Megane?
How to Reset the Tyre Pressure Light on a Renault Megane?
Renault Megane (2015-2023 / Megane 4, Megane IV) Resetting the tyre pressure light on a Renault Megane, as shown in this tutorial, is a very simple and quick operation. Before doing this, ensure the…
How to Use the Manual Key in the Renault Megane?
How to Use the Manual Key in the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In the Renault Megane, it can happen that the remote battery is flat, making it seemingly impossible to unlock the lock. In this tutorial, you will s…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos