|
Do it yourself
| |||
| ||||
Replace the Headlight Bulbs of the Renault Megane 2
Model: Renault Megane
Megane 2
- Years 2002-2010
Change the bulbs of the Renault Megane 2. Turn off the car, pull the handbrake, and open the bonnet. Start with the dipped beams. Access the bulbs easily through the access panel located under the wing, which you will carefully remove. At this point, you can take out the bulb holder by moving it slightly; remove the bulb, take the new one, and be careful not to touch the glass with your hands. If possible, use disposable gloves. Reinsert it into its holder and reposition the bulb in its housing. Replace the plastic cover. Close the access panel under the wing. Now proceed with the main beams, which are changed from the engine bay; here too, you need to remove the plastic cover, disconnect the electrical connector, push the tab to the right, and remove the bulb. Insert the new one with its flat side facing upwards. Refit the metal tab and reconnect the connector. To the right of the main beam bulb, there is a black tab: this is for the position light bulb; just pull it out to remove it. Reinsert it in its place. Replace the plastic cover. The job is complete.
Updated on 21 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Megane
(2008-2015 /
Megane III, Megane 3)
Have you decided to replace the headlight bulbs on your Renault Megane? In this video, we will see how to proceed with the bulb replacement. Open the…
Renault Megane
(2008-2015 /
Megane III, Megane 3)
Replacing the front headlight bulbs on a Renault Megane is a straightforward task. First, ensure the key is not inserted. Open the bonnet, remove the…
Renault Megane
(2008-2015 /
Megane III, Megane 3)
In this tutorial, we will see how to replace the headlights bulbs on a Renault Megane, a very simple and quick operation. First of all, let’s make su…
Other guides you may be interested in
|
How to Bleed the Clutch on a Renault Clio?
To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.737
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |