Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Light on a Renault Laguna?

Model: Renault Laguna MK III, X91, Laguna III, MK 3, Laguna 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light

See other generations:
Video tutorial

In this tutorial, you will see how to remove the rear light on a Renault Laguna, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety.

Start by opening the boot, then remove the panel on the side you will be working on. Once done, unscrew the 3 fixing bolts of the light and pull it towards you, extracting it from the bodywork. Finally, disconnect the rear connector and proceed with replacing the damaged element.

To fit the replacement part, simply follow the reverse procedure.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) Want to remove the front bulbs on a Renault Laguna? Lift the front bonnet and remove the cover cap located at the back of the headlamp. Locate the in…
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) To replace the front headlamp bulb on a Renault Laguna, open the bonnet to access the inside of the headlamp, where you will find the circular protec…
Renault Laguna (2001-2007 / MK 2, X74, Laguna 2) To replace the front headlamp bulb on a Renault Laguna, open the bonnet to access the components located at the rear of the headlamp. You will find a…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos