Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Bulbs on a Renault Laguna

Model: Renault Laguna MK 2, Laguna 2, X74 - Years 2001-2007
Part: Headlight bulb

Want to remove the front bulbs on a Renault Laguna? Lift the front bonnet and remove the cover cap located at the back of the headlamp. Locate the inspection cap for the headlamp (at the rear of the headlamp) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlamp and extract the damaged bulbs. Install the new bulbs in the front headlamp, then reassemble all the cover pieces of the front headlamp. Turn on the ignition and switch on the front lights for a functionality test.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Wipers on the Renault Laguna
How to Replace the Front Wipers on the Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) In this tutorial, see how to replace the front wipers on the Renault Laguna, a very simple and quick operation. First, set the wipers to service mode…
Removing and Replacing the Rear Light on a Renault Laguna
Removing and Replacing the Rear Light on a Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) Here are the instructions to remove and replace the rear light and its bulbs on a Renault Laguna. First, open the boot lid and start removing the sid…
How to Change the Front Brake Pads on a Renault Laguna 3?
How to Change the Front Brake Pads on a Renault Laguna 3?
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) In this video, you will see how to remove and replace the front brake pads on a third-generation Renault Laguna. First, lift the vehicle and remove t…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos