Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Laguna
    4. : How do you change the front brake pads on the Renault Laguna 3?

Renault Laguna - Video tutorial

Model: Renault Laguna MK 3, Laguna III, Laguna 3, MK III, X91 - Years 2007-2015
Part: Brake pads
Operation: How do you change the front brake pads on the Renault Laguna 3?

In this video we see how to disassemble and replace the front brake pads of the third series Renault Laguna. First we raise the car and remove the front wheel; then let's remove the metal stop that we find on the brake caliper, using a thin screwdriver. At this point we unscrew the screws of the front brake caliper, which we find on the back; we remove the caliper and the old brake pads, cleaning up the residual dirt. We just have to insert the new pads and reassemble the brake caliper, following the video until the end!


Posted on 24 November 2022 by ScegliAuto



How to remove the disc brake on Renault Laguna SW
Renault Laguna (2007-2015 / MK 3, Laguna III, Laguna 3, MK III, X91) Let's see in this video how to remove the disc brake with relative brake pads on a Renault Laguna. First of all we lift the car on a column point up
How to remove and replace the stop in the Renault Laguna?
Renault Laguna (2007-2015 / MK 3, Laguna III, Laguna 3, MK III, X91) This video tutorial explains the steps that must be taken to remove and replace the side brake light bulb in a Renault Laguna. First, you need to ope
Replacement of front brake pads
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) Loosen the wheel nuts and lift the car by securing it with the appropriate stands. Unscrew the bolts and remove the wheel. With the help of a screwdr

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos