Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Wipers on the Renault Laguna

Model: Renault Laguna MK 3, Laguna III, MK III, X91, Laguna 3 - Years 2007-2015
Part: Windshield wipers

In this tutorial, see how to replace the front wipers on the Renault Laguna, a very simple and quick operation. First, set the wipers to service mode by moving the corresponding lever to the third position with the engine off. Then, lift the first wiper, unlock the two clips located on the rear edge of the joint, and simultaneously push the blade outward until it separates from the arm. Next, position the replacement, secure it by pressing firmly, and repeat the procedure for the opposite wiper.

Posted on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Wiper Blades
Replacement of Wiper Blades
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) Replacing the wiper blades is a very simple operation and should be done before winter arrives or as soon as you notice that the current wipers leave…
How to replace the windshield wiper on a Renault Laguna
How to replace the windshield wiper on a Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) In this tutorial we can see the entire procedure necessary to replace the front wipers of a Renault Laguna, third generation model produced from 2007…
Replacing Front Bulbs on a Renault Laguna
Replacing Front Bulbs on a Renault Laguna
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) Want to remove the front bulbs on a Renault Laguna? Lift the front bonnet and remove the cover cap located at the back of the headlamp. Locate the in…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos