Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the windshield wiper on a Renault Laguna

Model: Renault Laguna MK III, X91, Laguna III, MK 3, Laguna 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Windshield wipers

See other generations:
Video tutorial

In this tutorial we can see the entire procedure necessary to replace the front wipers of a Renault Laguna, third generation model produced from 2007 to 2015. Therefore, the operation is very simple and quick to perform, and we can do it independently without the need for special equipment, but let's see immediately how to proceed.

We start the operation by lifting the wiper arm, then we press the two release tabs at the base of the wiper to remove it as shown in the video, once this is done we can easily insert a new one and proceed to replace the other wiper as well.


Posted on 10 May 2025 by ScegliAuto


Related tutorials

How to Replace the Front Wipers on the Renault Laguna
How to Replace the Front Wipers on the Renault Laguna
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) In this tutorial, see how to replace the front wipers on the Renault Laguna, a very simple and quick operation. First, set the wipers to service mode…
How to Reset the Service Light on a Renault Laguna
How to Reset the Service Light on a Renault Laguna
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) This video shows how to reset the service light on a Renault Laguna. Get in the vehicle, turn on the instrument cluster without starting the engine. …
Replacement of Wiper Blades
Replacement of Wiper Blades
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) Replacing the wiper blades is a very simple operation and should be done before winter arrives or as soon as you notice that the current wipers leave…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos