Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Captur
    4. : How to replace the cabin air filter on Renault Captur - Samsung QM3

Renault Captur - Video tutorial

Model: Renault Captur MK 1 - Years 2013-2019
Part: Cabin air filter
Operation: How to replace the cabin air filter on Renault Captur - Samsung QM3

In today's video tutorial we will see the steps that will allow us to disassemble and replace the pollen filter of the Samsung QM3, following the instructions below. First of all we get on board the car, on the driver's side, and start removing the plastic cover that we find on the left side of the pedal board; after which we remove the lid of the filter box to extract it, as shown in the video. At this point we are going to insert the new pollen filter in the correct direction; finally reassemble the lid and the plastic cover, following the video to the end!


Posted on 22 May 2024 by ScegliAuto



How to replace the rear brake shoes on Renault Captur - Samsung QM3
Renault Captur (2013-2019 / MK 1) .. shoes of the Renault Captur, but also of the Samsung QM3. First we raise the car on the back and start disassembling the rear wheel; then we unscrew..
How to replace the cabin air filter of the Renault Captur.
Renault Captur (2019-2024 / MK 2) Replacing the cabin air filter of the Renault Captur is a very simple operation, thanks to the help of our short video tutorial. The first thing to d
How to replace the cabin filter of the Renault Captur 2015?
Renault Captur (2013-2019 / MK 1) In this new guide dedicated to all of you owners of a first-generation Renault Captur (year 2015), we will describe all the necessary steps to correc

    Frequently Asked Questions

    • Captur 2013-2019 - Where is the pollen filter of the Renault Capture located? Read Answer
    • Captur 2013-2019 - Where is the cabin filter of the Renault Captur located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos