Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear brake shoes on a Renault Captur - Samsung QM3

Model: Renault Captur MK 1 - Years 2013-2019
Part: Brake drums and shoes

This guide shows how to replace the rear brake shoes on a Renault Captur, as well as on a Samsung QM3. First, raise the vehicle at the rear and begin by removing the rear wheel; then unscrew the central nut of the drum to remove it, as shown in the video. At this point, remove the springs from the shoes to replace them with new ones (of the correct type and high quality); clean the braking system of dirt and refit the new brake shoes and finally the drum, applying the reverse procedure!

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on the Renault Captur - Samsung QM3
How to Replace the Cabin Air Filter on the Renault Captur - Samsung QM3
Renault Captur (2013-2019 / MK 1) .. to remove and replace the pollen filter on the Samsung QM3, following the instructions below. First, get inside the vehicle on the driver's side and.. …
How to replace the front brake pads of the Renault Captur.
How to replace the front brake pads of the Renault Captur.
Renault Captur (2013-2019 / MK 1) Let's see the instructions that will allow us to disassemble and replace the front brake pads of the Renault Captur. First, we lift the vehicle and s…
How to change the brake pads on the Renault Captur 1
How to change the brake pads on the Renault Captur 1
Renault Captur (2013-2019 / MK 1) Let's see how to change the brake pads on the Renault Captur 1: first, open the hood and unscrew the cap of the brake fluid reservoir; lift the car a…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos