Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How do you replace the V-belt on the Renault Clio?

Renault Clio - Video tutorial

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: V-belt
Operation: How do you replace the V-belt on the Renault Clio?

In order to replace the V-belt on the Renault Clio, the car must be lifted using a lift and loosen all the bolts that secure the front right wheel, in order to access the components at the rear. Here it will be necessary to loosen the screws that fix the fuel filter support, in order to be able to access the pulleys. By loosening the tensioner pulley, the V-belt can be removed from its housing and replaced with a new spare part. After the new belt has been inserted, all other removed parts can also be fitted.


Posted on 19 November 2022 by ScegliAuto



Guide to replacing the timing belt of the Renault Clio 1.2
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today we will discover the instructions that will allow us to dismantle and replace the timing belt of the Renault Clio 1.2 petrol. First, we open th
How to replace the timing belt of the Renault Clio 1.2.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The following steps will show us how to disassemble and replace the timing belt of the Renault Clio 1.2 petrol. First, we lift the vehicle and begin
How to replace the timing belt in a Renault Clio 1.8 16v
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The video shows us the steps to be able to replace the timing belt in a Renault Clio. First of all it will be necessary to disconnect the pole of the

    Frequently Asked Questions

    • Clio 2005-2013 - How much does it cost to replace the timing belt on the 2007 Renault Clio 1500 dci? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos