Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to replace the V-belt on the Renault Clio 3?

Renault Clio - Video tutorial

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: V-belt
Operation: How to replace the V-belt on the Renault Clio 3?

In order to replace the trapezoidal belt of the Renault Clio 3 you have to go and lift the car and loosen the bolts that secure the front right wheel. Once this wheel has been removed, it will be possible to access the underlying components by removing the internal cover of the wheel arch. After removing the cover, the central nuts that secure the pulleys can be unscrewed, thus reducing the tension of the belt and removing it from its housing. Once the old belt has been removed, you will be able to insert the new one by fitting all the removed components.


Posted on 30 September 2022 by ScegliAuto



Guide to replacing the timing belt of the Renault Clio 1.2
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today we will discover the instructions that will allow us to dismantle and replace the timing belt of the Renault Clio 1.2 petrol. First, we open th
How to replace the timing belt of the Renault Clio 1.2.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The following steps will show us how to disassemble and replace the timing belt of the Renault Clio 1.2 petrol. First, we lift the vehicle and begin
How to replace the timing belt in a Renault Clio 1.8 16v
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The video shows us the steps to be able to replace the timing belt in a Renault Clio. First of all it will be necessary to disconnect the pole of the

    Frequently Asked Questions

    • Clio 2005-2013 - How much does it cost to replace the timing belt on the 2007 Renault Clio 1500 dci? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos