Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on Renault Clio 3 1.2

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Timing belt

Today, you will see the instructions that will allow you to remove and replace the timing belt on a Renault Clio third series with a 1.2 petrol engine. First, lift the vehicle and remove the front right wheel; then remove the wheel arch liner and the lower engine cover, as illustrated in the video. At this point, remove the battery and the engine intake hose, taking off the upper cover; disconnect the mass air flow sensor and remove the manifolds. Finally, remove the crankshaft pulley by taking off the V-belt, then remove the upper engine mount and finally the timing belt, following the video to the end!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Belt on Renault Clio 1.5 DCi
Replacing the Timing Belt on Renault Clio 1.5 DCi
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In today's tutorial, you will see the main instructions on how to remove and replace the timing belt on a Renault Clio 1.5 DCi, as well as on other c…
How do you replace the timing belt of the Renault Clio 1.5 DCi?
How do you replace the timing belt of the Renault Clio 1.5 DCi?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In order to replace the timing belt of the Renault Clio 1.5 DCi, you need to loosen the screws that secure the front right wheel of the car, so that …
How do you replace the timing belt of the Renault Clio?
How do you replace the timing belt of the Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In order to replace the timing belt of the Renault Clio, you need to lift the car with a jack so that the front right wheel can be removed from its h…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos