Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Camshaft

Model: Renault Laguna X74, Laguna 2, MK 2 - Years 2001-2007
Part: Engine

Before proceeding with the installation of the new camshaft, lubricate the sliding seats as well as the valve lifters; then apply the camshaft, lubricate the seats of the locking brackets, apply sealant along the closure edge of the cover which also serves as the fixing brackets for the camshaft itself, and tighten the fixing studs with the appropriately calibrated torque wrench. Then insert the side oil seal after lubricating it, ensuring it is fully seated; finally, install the timing belt pulley, align the timing marks, and install the timing belt.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Camshaft Oil Seal
Replacing the Camshaft Oil Seal
Renault Laguna (2001-2007 / X74, Laguna 2, MK 2) Remove the timing belt cover and secure the pulley to prevent it from rotating accidentally. Take off the timing belt and remove the pulley. Replace …
Complete Cylinder Head Revision Instructions
Complete Cylinder Head Revision Instructions
Renault Laguna (2001-2007 / X74, Laguna 2, MK 2) After machining the cylinder head, check the flatness of the surface with a straight edge and a feeler gauge for valves; proceed to replace the valve…
Guide for replacing the heating radiator on Renault Laguna 1
Guide for replacing the heating radiator on Renault Laguna 1
Renault Laguna (1994-2001 / Laguna 1, X56, MK 1) In this guide we will show you the main instructions to be able to remove and replace the radiator of the passenger compartment heating on the Renaul…

Other guides you may be interested in

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos