Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to replace the Renault Clio heat exchanger?

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Passenger compartment heating radiator
Operation: How to replace the Renault Clio heat exchanger?

In order to replace the Renault Clio heat exchanger, you need to loosen the screws that secure the plastic cover under the steering wheel and then also those behind the steering wheel. In this way it will be possible to remove the front airbag and consequently also the steering wheel, by removing all the connectors. This will allow you to detach the door pillar covers and loosen the bolts that secure the entire dashboard, giving access to the components below. Here you will find the heat exchanger, which can be removed from its housing and replaced with a new spare part.


Posted on 13 July 2022 by ScegliAuto



How to install dynamic arrows on the Renault Clio IV.
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Let's see how to install dynamic turn signals on our Renault Clio IV to give it a modern touch. The kit for the dynamic turn signals costs 34.99 euro
How do you open the hood of the Renault Clio II?
Renault Clio (1998-2005 / Clio 2, MK 2) In this video, we see how to open the front headlight of a Renault Clio II. Once the headlight is removed from its housing (you will certainly find a
How to reset the "Service" light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Before we can begin, we will have to sit in the driver's seat of our Renault Clio. Let's start by activating the instrumentation of our Renault Clio.

Other guides that may interest you

    Frequently Asked Questions

    • Clio 1998-2005 - Where is the Renault Clio 2 interior heating radiator located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos