Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Renault Clio?

Model: Renault Clio MK 4, Clio IV, Clio 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on a Renault Clio, insert the ignition key to power up the instrument cluster. Then, navigate through the menu on the instrument cluster using the button located at the top of the lever on the right side of the steering wheel.

When the message showing the remaining kilometres until the next service appears, press and hold the same button until the remaining kilometres are completely reset. After the reset, you can switch off and then on the instrument cluster to verify that the operation was successful.


Updated on 8 June 2026 by ScegliAuto


Related tutorials

Renault Clio (2012-2019 / MK 4, Clio IV, Clio 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to reset the "Service" light on your Renault Clio. Turn on the instrument panel by pressing the power button. Next, usi…
Renault Clio (2005-2013 / Clio III, MK 3, Clio 3) When the service light illuminates on the instrument cluster of your Renault Clio Mk3 (2005-2013) despite having already completed the service, you m…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos