Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Key Battery on a Renault Captur?

Model: Renault Captur MK 1 - Years 2013-2019
Part: Key

To replace the battery in the remote key of a Renault Captur, extract the emergency key from the top of the device, also detaching the appropriate plastic part. Once this is removed, use a screwdriver to pry under the circular cover, which must be removed to access the battery. The battery should be taken out from its housing and replaced with a new replacement part. After replacing, close the housing with the circular cover and reinsert the key.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery on the Renault Captur?
How to Replace the Remote Battery on the Renault Captur?
Renault Captur (2013-2019 / MK 1) This tutorial shows you how to replace the remote battery on the Renault Captur. For this simple and quick operation, you will need a small flathead …
How to Replace the Remote Battery on a Renault Captur?
Renault Captur (2019-2026 / MK 2) To replace the remote battery on a Renault Captur, press the side button so that the top part of the remote, with the internal key, can be extracted.…
How to Change the Remote Battery in the Renault Captur
How to Change the Remote Battery in the Renault Captur
Renault Captur (2013-2019 / MK 1) To change the battery in the Renault Captur remote, remove the key by pressing the button on the side and extracting the key. Using a flathead screwd…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos