Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Fog Light Bulb on the Renault Scenic

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Fog lights

See other generations:
Video tutorial

In today’s tutorial, we will see how to remove and replace the rear fog light and its bulb on the Renault Scenic. First, move to the back of your car and start by removing the bulb holder from the fog light unit; to do this, disconnect the entire connector and then pull out the bulb, as shown in the video.

Now, replace the old bulb with a new one that has the same fitting; lever the light unit to remove it, then install the new one and secure the bulb, following the video until the end!


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Renault Scenic 2
How to replace the rear headlight bulb of the Renault Scenic 2
Renault Scenic (2003-2009 / Scenic 2, MK 2) If you own a Renault Scenic Mk2 and are wondering how to replace the rear headlight bulb, then all you have to do is read the following guide and fol…
How to Replace the Reverse Light Bulb on the Renault Scenic
How to Replace the Reverse Light Bulb on the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Below are the instructions for removing and replacing the reverse light bulbs on the Renault Scenic. First, move to the rear and start by unscrewing …
How to Replace the Brake Light Bulb of the 2017 Renault Scenic
How to Replace the Brake Light Bulb of the 2017 Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) In this guide for all Renault Scenic (2017) owners, we will describe the steps you need to take if you intend to replace the brake light bulb of one …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos