Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the air vents on the Renault Kwid?

Model: Renault Kwid MK 1 - Years 2015-2024
Part: Air vents

To be able to remove the central air vents of the Renault Kwid, you need to pry the lower part of the car radio, so that it can be removed completely, by detaching the connectors located in its rear part. Once the device has been removed, it will be possible to pry and detach the molding that surrounds it, on which the corresponding air vents are also placed: these can be removed from its housing by unscrewing the fixing screws and replacing them with new ones . After the replacement it will be possible to fit all the previously removed components.

Posted on 26 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the ventilation nozzles of the Renault Kwid?
How do you replace the ventilation nozzles of the Renault Kwid?
Renault Kwid (2015-2024 / MK 1) In order to replace the ventilation grilles of the Renault Kwid, you need to use an object to pry them open so that the corresponding grille can be r…
How do you reset the Service light on the Renault Kwid?
How do you reset the Service light on the Renault Kwid?
Renault Kwid (2015-2024 / MK 1) To reset the Service light of the Renault Kwid, you will need to connect a diagnostic tool to the OBD port of the vehicle: this will be located on th…
How to remove the rear seat of the Renault Kwid
How to remove the rear seat of the Renault Kwid
Renault Kwid (2015-2024 / MK 1) In this video, we see how easy it is to remove the rear seat of a Renault Kwid: the backrest is held in place by two metal rings, which are attached …

How to Replace the Window Regulator on the BMW X3

Replacing the window regulator mechanism requires removing the door panel and the aluminum underpanel to access the mechanism itself. Remove the motor and loosen the glass retaining clips to complete the removal of the window regulator. Attach the motor to the new mechanism and insert the assembled unit back into the door, securing it with the appropriate nuts. Then, insert the glass and tighten the clips, completing the installation by connecting the motor's power connector and performing a functionality check before reassembling all other components.

Watch the video!


by ScegliAuto

More videos