Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Monitor Fuel Consumption on the Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Onboard computer

In this video, you will learn how to monitor fuel consumption on the Renault Clio. Turn on the instrument panel and observe the display in the centre. At the end of the indicator stalk, there are two arrows (one pointing up and the other down). By moving up and down with the arrows, you can monitor four parameters: 1) current fuel consumption, 2) fuel consumption already used, 3) average fuel consumption based on the vehicle's speed, and 4) the range, which indicates how many miles you can still travel at the current speed until the next refuelling.

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to View Average Fuel Consumption in the Renault Clio
How to View Average Fuel Consumption in the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Keeping track of the average fuel consumption of your Renault Clio Mk3 is important as it provides insights on how to optimise your driving and expen…
How to Replace the Fuel Filter on the Renault Clio 2 1.2 Petrol
How to Replace the Fuel Filter on the Renault Clio 2 1.2 Petrol
Renault Clio (1998-2005 / Clio 2, MK 2) Let’s discover the steps to remove and replace the fuel filter on the second series Renault Clio, following the instructions below. First, lift the v…
Renault Clio Diesel Filter Removal
Renault Clio Diesel Filter Removal
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To remove the diesel filter on a Renault Clio, take out the diesel filter located in the front bumper. Remove the right wheel, then take off the plas…

    Frequently Asked Questions

    • Clio 2012-2019 - How to fix bluetooth connection problems on Renault Clio? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos