Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Bonnet of the Renault Clio?

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Body

See other generations:
Video tutorial

To open the bonnet of the Renault Clio, pull up the lever located to the left of the driver's footwell: once the lever is pulled, you will notice that the bonnet has been released. To lift it, lower the catch located at the front centre: by moving this catch, the bonnet will be raised, allowing access to the components inside the engine bay. To close the bonnet again, lower it with sufficient force so that the latch locks securely.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this tutorial, you will see how to open the bonnet on a Renault Clio 4, a very simple operation that follows the standard procedure for most vehic…
Renault Clio (2019-2026 / Clio V, Clio 5) To open the bonnet of the Renault Clio model 5 produced from 2019 to present, pull the bonnet release lever located next to the pedal box. Once the l…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) .. Today's video will show you how to open the bonnet of the Renault Clio in simple and quick steps. First, open the front door and.. …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos