Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to replace the driver's door in Renault Clio?

Renault Clio - Video tutorial

Model: Renault Clio MK 2, Clio 2 - Years 1998-2005
Part: Door
Operation: How to replace the driver's door in Renault Clio?

In this tutorial we can see how to replace the driver's door in the Renault Clio, a simple operation that requires good manual skills. First of all we disassemble the interior handle and disconnect the lock rope, then we remove the window control console and the covers of both pillars. We then disengage the panel from the door, disassemble the lock cylinder and continue by unscrewing the hinge fixing bolts. At this point, we can separate the door and mount any replacement by following the reverse procedure.


Posted on 13 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Clio 2005-2013 - Why doesn't the rear hatch of the Renault Clio open anymore? Read Answer
    • Clio 2012-2019 - What to do when the rear door of the Renault Clio is locked? Read Answer
    • Clio 2005-2013 - What to do when the Renault Clio tailgate does not open? Read Answer
    • Clio 2012-2019 - Why does the Renault Clio not open? Read Answer
    • Clio 2012-2019 - How to unlock the tailgate of the Renault Clio? Read Answer
    • Clio 2019-2026 - Why does the fuel filler flap of the Renault Clio not open? Read Answer
    • Clio 2019-2026 - Why does the trunk of the Renault Clio Hybrid not open? Read Answer
    • Clio 2012-2019 - How many speakers are there in the rear door of the Renault Clio 4? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos