Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Indicator Bulb on a Renault Master

Model: Renault Master MK 2 - Years 1997-2010
Part: Side marker light

If you want to independently replace the bulb of the side indicator light on your Renault Master second series (1997-2010), follow these simple steps. First, park the vehicle safely on a flat surface. Next, position yourself in front of the light in question and, using a flat screwdriver (or similar object), remove it. Disconnect the electrical pin, remove the old bulb, and replace it with a new compatible one. Finally, correctly reposition the light, and you are done.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the turn signal bulb of the Renault Master side mirror
Replacement of the turn signal bulb of the Renault Master side mirror
Renault Master (2010-2023 / MK 3) These short and simple steps will show us how to disassemble and replace the turn signal bulb of the external rearview mirror of the Renault Master. …
How to Replace the Rear Indicator Bulb on the Renault Master?
How to Replace the Rear Indicator Bulb on the Renault Master?
Renault Master (1997-2010 / MK 2) To replace the rear indicator bulb, access the inside of the load area to locate the small internal protective panel. This must be removed to disconn…
How to replace the headlight bulb of the Renault Master
How to replace the headlight bulb of the Renault Master
Renault Master (1997-2010 / MK 2) Today we will explain how to replace all the bulbs of the front headlights on a Renault Master model 2 vehicle. We start with the replacement of the …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos