Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Renault Captur

Model: Renault Captur MK 2 - Years 2019-2026
Part: Warning light – error code

After each oil and filter change, the service light on your vehicle's display will illuminate. Therefore, after each service, you need to reset this indicator. To do this, follow the instructions below and check the video. First, turn on the ignition and use the up and down arrow buttons on the right side of the steering wheel to select "oil change". Then press and hold the "down arrow" button; after a few seconds, the indicator will start to flash, and the reset will be performed. Repeat the same procedure to reset the maintenance reminder.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service of the Renault Captur
How to reset the service of the Renault Captur
Renault Captur (2013-2019 / MK 1) Today's instructions will show us the steps that will allow us to reset the service light for the regular maintenance of the engine oil change on the…
How to Reset the Maintenance Service on the Renault Captur
How to Reset the Maintenance Service on the Renault Captur
Renault Captur (2019-2026 / MK 2) In this video, you will learn how to reset the maintenance service on the Renault Captur. This is a very simple operation that will take no more than…
How to Reset the Service Light on the Renault Captur
How to Reset the Service Light on the Renault Captur
Renault Captur (2019-2026 / MK 2) .. In this tutorial, you will see how to reset the service light on the Renault Captur, a very simple and quick operation that should only.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Captur 2013-2019 - What do the warning lights in the dashboard of the Renault Captur mean? Read answer

How to Remove the Airbag from Citroen C3

To remove the airbag from a Citroen C3, follow these steps, which you can also see in the attached video. Check the warning light: before proceeding, ensure that the airbag warning light is off and that the horn functions correctly. Disconnect the battery: disconnect the battery to ensure safety during the operation. Locate the holes behind the steering wheel: find the two holes located behind the steering wheel. Insert a long screwdriver: insert a long screwdriver into the holes and press firmly to unlock the internal clips. Remove the airbag: at this point, you can remove the airbag from the steering wheel and disconnect the two internal connectors.

Watch the video!


by ScegliAuto

More videos