Do it yourself
Frequently asked questions about cars and motorcycles

Guide on How to Adjust the Handbrake of the Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Checks and maintenance

This guide briefly explains the steps to adjust the handbrake lever of the Renault Clio. First, get into the vehicle and remove the plastic cover of the centre console by unscrewing the Torx screw located inside the rear cup holder; this will allow access to the handbrake adjuster, where you will screw or unscrew depending on whether you want to tighten or loosen the handbrake, as shown in the video. For the handbrake to function correctly, it is essential that the rear brake shoes are in good condition.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To adjust the handbrake of the Renault Clio, you need to loosen the screws that fix the panel covering the central tunnel of the car: once these scre…
Renault Clio (1998-2005 / Clio 2, MK 2) This article explains how to adjust the handbrake travel on the Renault Clio 2, a necessary procedure to ensure the handbrake is always effective and…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This handbrake adjustment procedure applies to all French-built vehicles and is performed from the cabin. Access it easily from the centre console by…

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos