Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : How to adjust the handbrake in the Renault Clio?

Renault Clio - Video tutorial

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Hand brake
Operation: How to adjust the handbrake in the Renault Clio?

In this tutorial we can see how to adjust the handbrake in the Renault Clio, an extremely simple and quick operation. First of all, park the vehicle in a perfectly flat place with the gear engaged, then position yourself on the rear seat and unclip the plastic cover of the central tunnel. Next, locate the adjustment nut, grab it using a 10mm socket wrench and tighten it until reaching the desired tension level. Finally, test the correct operation of the handbrake on a suitable road.


Posted on 29 February 2024 by ScegliAuto



How to adjust the handbrake of the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To be able to adjust the handbrake of the Renault Clio it is necessary to unscrew the bolts located around the plastic cover of the central tunnel, s
How do you adjust the handbrake of the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In order to adjust the handbrake of the Renault Clio, you need to lift the car with a jack or a lift, so that the right rear wheel is removed from it
Guide on how to adjust the Renault Clio handbrake
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this guide, let's briefly see the steps that will allow us to adjust the handbrake lever of the Renault Clio. First of all, we get on board the ca

    Frequently Asked Questions

    • Clio 2005-2013 - What problems can the illuminated handbrake light indicate on a Renault Clio? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos