Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Trafic
  6. : How to replace the remote control battery of the Renault Trafic van?

Renault Trafic - Video tutorial

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Key
Operation: How to replace the remote control battery of the Renault Trafic van?

In this tutorial we can see how to replace the remote control battery of the Renault Trafic van, an extremely simple and fast operation. To do this, we will only need a small flat-tip screwdriver and a 3V DL1220 type battery. First of all, identify the slot located in the lower left area of the remote control, then insert the tip of the screwdriver inside, leverage and separate the two halves. Once this is done, we extract the old battery helping ourselves again with the screwdriver, position the spare with the positive pole facing us and recompose everything.


Posted on 16 May 2023 by ScegliAuto



How to replace the battery in the Renault Trafic remote control?
Renault Trafic (2001-2014 / MK 2) To replace the battery of the Renault Trafic remote control, you need to unscrew the screw located in the corner of the device, so that the two plast
Replace the remote control battery on Renault Trafic
Renault Trafic (2001-2014 / MK 2) If the central locking of your Renault Trafic stops working, it will probably cause interference or, more simply, the dead battery inside the remote
Where is the battery located in the Renault Trafic van?
Renault Trafic (2001-2014 / MK 2) In this video we can see where the battery is located in the Renault Trafic van, useful in case we need to replace it. As shown, the battery is not l

    Frequently Asked Questions

    • Trafic 2014-2027 - Renault Trafic remote key does not work what to do? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos