Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform the Service Reset on a Renault Scenic 3

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Warning light – error code

See other generations:
Video tutorial

This brief video tutorial shows all the steps necessary to reset the service light on a third generation Renault Scenic, produced from 2009 to 2015. Start by turning on the vehicle's ignition without starting the engine. Next, press the upper button at the end of the right steering lever to scroll through the menu options on the speedometer's information display.

When you reach the oil change notification, press and hold the lower button at the end of the right steering lever. The message will start to flash, so keep the button pressed until it stops flashing, and the reset will be completed successfully.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Renault Scenic?
How to Reset the "Service" Light on a Renault Scenic?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Before you can start, ensure that the service has been performed, then sit in the driver's seat of your Renault Scenic. Begin by activating the instr…
How to reset the Service light on a Renault Scenic?
How to reset the Service light on a Renault Scenic?
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To reset the Service light on a Renault Scenic, press the ignition button without pressing any pedals, so that only the instrument cluster lights up …
How to Reset the Service Light on a Renault Scenic - Grand Scenic
How to Reset the Service Light on a Renault Scenic - Grand Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In this short and simple guide, we will see the procedure to reset the service light on a Renault Scenic and Grand Scenic. First, get inside the vehi…

    Frequently Asked Questions

    • Scenic 2003-2009 - How to enter the radio code of the Renault Scenic year 2003? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos