Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter on a Renault Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Cabin air filter

See other generations:
Video tutorial

In this tutorial, you will learn how to remove and replace the cabin air filter on a Renault Clio, following the instructions below. First, open the bonnet of your car and start by removing the plastic cover located at the top left of the engine bay. Then, extract the pollen filter cartridge to remove it from the filter box, as shown in the video.

Now install the new pollen filter, inserting it in the correct orientation (usually indicated by arrows printed on the filter); then reattach the cover!


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Change the Cabin Filter on a Renault Clio
How to Change the Cabin Filter on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) .. Changing a worn cabin filter? Let's look at replacing the cabin air filter on a Renault Clio. Disconnect the plastic cover of the air filter housing.. …
Replacement of the cabin air filter of the Renault Clio
Replacement of the cabin air filter of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The information provided in this guide will allow us to remove and replace the cabin air filter of the Renault Clio. First, we open the front door on…
How to Replace the Air Filter of the 2012 Renault Clio
How to Replace the Air Filter of the 2012 Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Replacing the engine air filter of your 2012 Renault Clio III is quite simple. Follow the procedure below to complete the task without any difficulty…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos