Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Position Lights on the Renault Megane Mk2 cc

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light

See other generations:
Video tutorial

This guide shows how to replace the rear position lights on the Renault Megane Mk2 cc. First, close the sunroof and open the boot. Next, unscrew the two securing bolts of the light by operating the removal knobs located on the side of the compartment.

Carefully pull out the light assembly, taking care of the securing clips and the control electrical cable. Once the cable is disconnected, remove the bulb holder for the position lights and replace the bulb.

Refit the light assembly and check the correct operation of the light.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulbs on the Renault Megane?
How to Replace the Rear Light Bulbs on the Renault Megane?
Renault Megane (2015-2023 / Megane IV, Megane 4) In this tutorial, we will see how to replace the rear light bulbs on the Renault Megane, an extremely simple and quick operation. First, ensure that …
How to replace the rear light bulbs on a Renault Megane Grand Tourer?
How to replace the rear light bulbs on a Renault Megane Grand Tourer?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, see how to replace the rear light bulbs on a Renault Megane Grand Tourer, a very simple and quick operation. First, ensure the key …
How to Replace the Rear Light Bulbs in a Renault Megane?
How to Replace the Rear Light Bulbs in a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to replace the rear light bulbs in a Renault Megane, an extremely simple and quick operation. First, ensure that t…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos