Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Renault Captur Battery Replacement

Model: Renault Captur MK 1 - Years 2013-2019
Part: Battery

Let's see how to Replace the battery of the Renault Captur when this becomes necessary. We open the hood of the engine compartment, and the battery will be positioned on our right. We begin the disassembly by unscrewing the screw that holds the fixing bracket using a spanner with an extension, we remove the terminals starting from the negative pole and then moving on to the positive, we remove the breather tube. We can thus remove the old battery. We clean the terminals from oxide residues, pass a thin layer of copper paste on the poles of the new battery and place it in its seat. Put the two clamps back on starting from the positive, screw the fixing bracket and insert the breather tube.

Posted on 20 March 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of a Renault Captur key?
How to replace the battery of a Renault Captur key?
Renault Captur (2019-2026 / MK 2) Good morning, today's goal is to replace the battery of our Renault Captur key. Let's start by sliding down the back cover of the key. Then, we will …
How to change the battery of the key remote control for a Renault Captur.
Renault Captur (2019-2026 / MK 2) Replacing the battery of the key remote of a Renault Captur car is quite simple. Take the vehicle remote and apply pressure by sliding the part of th…
How to remove the battery of a Renault Captur
How to remove the battery of a Renault Captur
Renault Captur (2013-2019 / MK 1) Before we can begin, we will have to open the front hood of our Renault Captur. So let's start by unscrewing and removing the bolts that secure the b…

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos