Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulb on the Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: License plate light

See other generations:
Video tutorial

If the number plate light on your Renault Megane Mk3 (2008-2015) has stopped working and you want to learn how to replace it correctly, read this guide and follow the instructions. First, turn off the car and go to the outside.

Lift the bonnet and remove the number plate light using a flat screwdriver. Once removed, use the screwdriver again to open it and access the bulb inside.

Finally, replace the old bulb with the new one.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to Replace the Number Plate Lights on the Renault Megane
How to Replace the Number Plate Lights on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow these step-by-step instructions to remove and replace the number plate bulbs on the Renault Megane in simple, quick steps. First, move to the …
Replacing the number plate bulbs on the Renault Megane
Replacing the number plate bulbs on the Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) In this short and simple guide, you will see how to remove and replace the number plate lights on the Renault Megane by following these simple steps.…
How to replace the license plate light of the Renault Megane II.
How to replace the license plate light of the Renault Megane II.
Renault Megane (2002-2010 / Megane 2) The steps to replace the license plate light of the Renault Megane II are as follows: - Open the trunk of the car; - Insert a flat-head screwdriver i…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos