Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Mass Air Flow Sensor on the Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: MAF sensor

Here are the instructions to clean the mass air flow sensor on the Renault Clio. First, open the bonnet of the vehicle and begin removing the mass air flow sensor; to do this, disconnect its electrical connector, then unclip the sensor to remove it, as shown in the video. Now use appropriate degreasing products to clean the mass air flow sensor; then refit the sensor and check its operation, replacing it if the air quantity readings have not normalised.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Clean the Throttle Body of the Renault Clio 1.2
How to Remove and Clean the Throttle Body of the Renault Clio 1.2
Renault Clio (1998-2005 / Clio 2, MK 2) In today's video tutorial, you will see how to remove and clean the throttle body of the Renault Clio with a 1.2 petrol engine. First, open the bonne…
How to Replace the Timing Belt on Renault Clio 3 1.2
How to Replace the Timing Belt on Renault Clio 3 1.2
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today, you will see the instructions that will allow you to remove and replace the timing belt on a Renault Clio third series with a 1.2 petrol engin…
How to Clean the EGR Valve on a Renault Clio
How to Clean the EGR Valve on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How to remove the EGR valve on a Renault Clio? Lift the bonnet and secure it; using a screwdriver, unscrew the locking pins of the ventilation pipe a…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos