Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Renault Remote Key

Model: Renault Renault Various
Part: Key

If you need to replace the battery in the electronic key of a Renault vehicle, the description below outlines the steps to follow for a proper replacement. First, slide off the rear shell of the remote, then remove the cover, under which you will find the battery compartment. Extract the battery from its housing by lifting it upwards and take the new battery, positioning it according to the correct polarity. Then, replace the cover and reattach it, and you're done.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Renault remote control battery
How to replace the Renault remote control battery
Renault Renault Various Today we will explain how to replace the battery of the remote control for Renault vehicles Clio 4, Koleos, Scenic 3, Captur, and Megane 3. To replac…
How to replace the battery of the key fob remote for a Renault Kiger.
How to replace the battery of the key fob remote for a Renault Kiger.
Renault Renault Various The procedure for replacing the battery of the key remote of a Renault Kiger car is very simple. First, take the key remote and use a flat-tip screwd…
Replacing the Key Battery on a Renault
Replacing the Key Battery on a Renault
Renault Renault Various Let's replace the battery in the key of our Renault. First, press the button on the side of the key and extract the emergency key from the remote. No…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos