Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Renault Kadjar

Model: Renault Kadjar MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Air filter

Video tutorial

In this video tutorial, you will see how to replace the air filter on a Renault Kadjar by following a few simple steps. First, purchase a new air filter.

Next, get inside the vehicle and pull the bonnet release lever, lift the bonnet, and secure it with the prop rod. Disconnect the intake hose and remove the two clips located on either side of the air filter box. Do not remove the airbox door; simply open it and take out the air filter from its housing.

Once the old filter is removed, cover the intake hose with a cloth to prevent debris from entering the system, then clean the filter box with an air compressor.

Now, position the new filter and reassemble all parts in reverse order.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Renault Kadjar 1.2 TCe
How to Replace the Air Filter on the Renault Kadjar 1.2 TCe
Renault Kadjar (2015-2022 / MK 1) In a few simple steps, learn how to remove and replace the engine air filter on the Renault Kadjar 1.2 TCe. First, open the bonnet of the vehicle and…
How to replace the air filter of the Renault Kadjar
How to replace the air filter of the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The cabin air filter of the Renault Kadjar is located inside the cabin, specifically under the passenger side glove compartment. To replace the cabin…
How to change the engine air filter of the Renault Kadjar.
How to change the engine air filter of the Renault Kadjar.
Renault Kadjar (2015-2022 / MK 1) To prevent the engine of your Renault Kadjar from overheating abnormally, it is important to regularly replace the appropriate air filter. In the fol…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos