Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in Your Car

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter allows you to breathe clean air, filtered from smog, pollen, and harmful fumes. It needs to be checked at every service and replaced if necessary.

It should be changed once a year or every 15,000 miles or so, and it is not very expensive. It is usually located on the passenger side, under the glove compartment.

Once you unscrew the screws and remove the cover, you will notice the filter, which can be pulled out of its housing with your thumb. At this point, take the new filter and use the reverse procedure to install it, making sure to slide it carefully back into place.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter in a Renault Twingo 3
How to Replace the Cabin Air Filter in a Renault Twingo 3
Renault Twingo (2014-2024 / Twingo III, Twingo 3) If you want to replace the cabin air filter in your Renault Twingo third series, simply follow the steps described. First, purchase a new air filter …
Replace Air Filter on Twingo
Replace Air Filter on Twingo
Renault Twingo (2007-2014 / Twingo 2) Is the air filter damaged? Let's replace the air filter on the Twingo. Open the car door, pull up the engine compartment release lever located at the…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Renault Twingo (1993-2007 / Twingo 1) The cabin air filter is located on the passenger side, just below the glove compartment; this filter has a unique feature, as it does not have a cove…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos