Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Right Plastic Door on a Renault Clio 2

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Car door

See other generations:
Video tutorial

As seen in the video, to remove the right passenger door of a Renault Clio 2, you need to unscrew a Torx screw located in the handle area and a Phillips screw positioned where the door opening lever is. There are three more screws at the bottom to unscrew.

To remove the plastic from the door, extract the speaker cover and unscrew the two related screws.

Disconnect the connector, lift the handle area with a lever, and remove a small plastic element above the door as shown in the video. After that, using a lever, detach the entire perimeter of the plastic part to remove it.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to Remove the Door Handle and Lock on the Renault Clio 4
How to Remove the Door Handle and Lock on the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video tutorial, you will find instructions to remove and replace the door handle along with the lock on the fourth generation Renault Clio. F…
Guide to Removing the Door Panel of the Renault Clio
Guide to Removing the Door Panel of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This guide shows you how to remove and replace the front door panel of the Renault Clio. First, open the front or rear door and start removing the pl…
Remove the right front door panel on a Renault Clio
Remove the right front door panel on a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Remove the right front door panel on a Renault Clio: disconnect the window winder, use a screwdriver to remove the screws located in the upper lever …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos