Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing Fog Light

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Light bulb

See other generations:
Video tutorial

Replacing the fog light is very simple, especially if you can lift the vehicle to make access to the light much easier. Locate the fog light housing situated in the lower section of the bumper, disconnect the power connector, and remove the two fixing screws to completely take it out. Retrieve the bulb from the original light and install it in the new light after applying the new gasket.

Complete the installation by securing the light with the relevant screws and reconnecting the power connector.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Replacing the Front Fog Light Bulbs on the Renault Scenic
Replacing the Front Fog Light Bulbs on the Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Today, follow these step-by-step instructions to remove and replace the front fog light bulb on the Renault Scenic. First, lift the vehicle and disco…
How to Replace the Fog Light Bulb on a Renault Scenic II
How to Replace the Fog Light Bulb on a Renault Scenic II
Renault Scenic (2003-2009 / Scenic 2, MK 2) To facilitate the replacement of the fog light bulb, raise the vehicle on a lift or suitable ramps to provide more working space. Then, unscrew the t…
How to Change the Rear Fog Light Bulb on the Renault Scenic
How to Change the Rear Fog Light Bulb on the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In today’s tutorial, we will see how to remove and replace the rear fog light and its bulb on the Renault Scenic. First, move to the back of your car…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos